SAJ-R6-20KW Grid Tied Inverter 2MPPT 3 Phase

Description

The SAJ-R6-20KW Grid Tied Inverter 2MPPT Three-Phase Solar Inverter comes with a warranty of up to 5 years. This solar inverter model is considered super-efficient as the DC to AC conversion ratio is merely up to the mark. The recommended accessed DC power is up to 24200 Watts. Likewise, the solar inverter MPPT module is able to handle a maximum DC voltage range of 180 – 900 V. The voltage required for the starting of the solar power inverter model is up to 200 V. On the other hand, the minimum DC voltage as the input is 180 V. There are two MPPT modules installed in the solar inverter for better conversion efficiency.

Working Efficiency

The maximum efficiency of DC to AC conversion is up to 98.5%—the MPPT module has an accuracy of >99%. The rated AC power generated out by the solar inverter model is up the 20000 VA. Here, are some of the important outputs working factors;

• The maximum AC apparent power of the SAJ-R6-20KW On-Grid Solar Inverter is—22000 VA.
• The rated AC current from the solar inverter is up to 29 amperes.
• The maximum generated AC current from the model—33 amperes.
• The grid frequency range moves from—50 Hz, 60 Hz/44Hz-55Hz, 54Hz-65Hz.
• The power factor of the model is 0.8 leading – 0.8 lagging.
• THDi (total harmonic distortion) is less than even 3%.

Related: SAJ-R6 10K On-Grid Solar Inverter

Protective Features

The protective features of the solar inverter allow the device to be safe from imminent damage—this can be because of many reasons. Some of the protective features are;

• Internal Over-Voltage Protection
• DC Insulation Monitoring
• AC Short Circuit Current Protection
• Thermal Protection
• AC Surge Protection
• DCI/GFCI/ Grid Monitoring